Thick film heating tube introduction
Thick Film Heater is a new technical art which is use screen printing technology and new thick film material. It is printed with isolation dielectric, resistor, conductor on stainless steel tube surface. It can instant heat water flow through it Water and Electric are totally insulated.
Stainless steel thick-film heating tubes of GIDAPE® ANDETONG® series manufactured by JIEDA company are tubular structures, which allows rapid water flow and instant heat carrying. Under the same conditions, GIDAPE® ANDETONG® series has many application advantages, such as large heating area, high heat conduction efficiency (≥98%), rapid thermal response (≥80 ℃~150℃/S), long working life (≥10000 hours) ，etc.
As first domestic professional manufacturer of stainless steel thick-film heating pipe , Jieda GIDAPE® ANDETONG® products series mainly are stainless steel thick-film heating pipe(SUS430 series), covering thick-film plate. Currently GIDAPE® ANDETONG® series stainless steel thick-film heating pipe diameter distribution Φ18-50mm, length 110-150mm, the single pipe maximum power 6KW, the dimension power of standing standard products are comparatively complete. Special power, voltage, requirements can be customized design.
At present, thick film heating tube(heating body) of GIDAPE® ANDETONG® series has been successfully applied to fluid heating field, such as: instant hot water dispenser, quick hot water boiler, pipeline machine, electric heat faucet, kitchen under sink water heater, milk machine, coffee machine, industrial equipment and so on.
And this customized heating tube with 2080w/230v 075*045 product parameter is for home dishwasher.
Instant heating to set temperatures ( if dishwasher is requesting for many temperature settings during the process.)
Product use precautions:
1, The product temperature rising rate is greater than 80 ℃~150℃/S, so, please ensure that the tube is filled with water before use.
2, The pipe must be installed vertically when heating liquid, the direction of liquid flow is from the bottom up. To avoid local dry burning, please add water at first, and then connect to power.
3, Based on different powers, the user should ensure the minimum flow, while ensuring smooth water access to the pipe, so as to avoid vaporization and dry burning.
4, Pay attention to the surface heat dissipation; and due to a big power density, please also pay attention to the rate of heat exchange.